Install/ Update Wiko Ufeel Prime to Android 7.0 Nougat Stock ROM Firmware

Ramandeep Singh May 20, 2022Last Updated: May 20, 2022

2,514 4 minutes read

If you were waiting for the arrival of Android 7.0 Nougat on your Wiko Ufeel Prime, then here is a good news. Those who were wondering to install the latest Stock ROM Firmware on your device, can now rejoice as they can flash the latest software on their device.

Wiko has officially released the Stock Android 7.0 Nougat or the Wiko Ufeel Prime. The Android 7.0 Nougat is latest, and predecessor to the about to be released, Android 8.0 O software. The Official Nougat Firmware comes with the various Bug fixes, Security patches, and improve overall stability of the device.

So, if you own a Wiko Ufeel Prime, you can install the latest update for your device, which comes with UFEEL_PRIME_Nougat_V25, and is based on Android 7.0 Nougat. The update often aims to increase system stability and increase the performance of the device, as well as adding new features.

All Wiko Ufeel Prime owners may already received the OTA Update notification on their device. You might be already aware of the fact that Android Team fixes the vulnerabilities found in the operating system time to time, and releases the updates on timely manner. The OEMs, then push the Security Updates with patched/ fixed Android vulnerabilities in the form of OTA and Stock ROM updates. Updating your smartphone through OTA Firmware update do not delete the data.

[Phone Brief Intro]

In the below guide, we will be guiding you step by step process to flash/ install latest UFEEL_PRIME_Nougat_V25 Android 7.0 Nougat on Wiko Ufeel Prime. The download link for this Stock ROM has been added to the pre-requisite section. You can simply flash the Stock Firmware .pac file manually through SPD Flash Tool, if you have not received it through the OTA update.

Firmware Details:

Android Version: Android 7.0 Nougat

UI Version: Stock

Firmware Versions: UFEEL_PRIME_Nougat_V25

Model: Wiko Ufeel Prime

Release Date: September

Android security patch level: August

Country: NA

Status: – Official

Disclaimer: AndroidWeblog.com covers although everything in a very neat and a processed manner so that our readers get exactly what they want, still there are meager chances of basic issues that may arise out of the listed steps here. Hence it is in sole interest of the user to follow the steps very cautiously so as to stay away from any mishappenings with your device.

Updating or flashing the Stock ROM firmware or Custom ROM firmware updates certainly without any doubt comes with risk to brick device. If you brick the device, while upgrading the firmware of your smartphone, then kindly be in touch with the Official Service center of Wiko near your location. AndroidWeblog.com in no way will be held responsible for warranty void or your bricked device.

Table of Contents

Prerequiste

Ensure to check your model number, which must be:

Wiko Ufeel Prime

You must have to ensure that prior to updating your phone , you have read thoroughly the disclaimer and you agree to proceed further on your risk.

Phone Should be Charged

Your phone must be 70% charged atleast else, it may lead to complications sometimes while experimenting. Why to take risk, try to charge it fully.

Back Up

If you are updating your phone to Stock ROM or Custom ROM firmware, then, it is a good habit to make a back up of your phone. Make a back up of all your media like images, videos and all on your PC and your contacts on Cloud.

Enable USB Debugging

You must enable USB debugging option by going in to Settings, Applications and Developer options.

Downloads For updating Wiko Ufeel Prime

Download Latest Drivers for your Wiko Smartphone

Download Latest version of QPST/QFIL Tool from here.

Download UFEEL_PRIME_Nougat_V25 update for Wiko Ufeel Prime based on Android 7.0 Nougat from here.

Download Latest Qualcomm Drivers/ QDLoader HS USB Driver: 32-bit | 64-bit.

How to update Wiko Ufeel Prime to UFEEL_PRIME_Nougat_V25 Android 7.0 Nougat via OTA (Over the air)

Note: For this method, you won’t need to download any file mentioned in pre-requisite section of this article. You can directly follow the below steps, if you prefer the OTA method.

You can directly check the latest version of firmware/ software available for your device, Wiko Ufeel Prime by navigating to:

Settings > About Device > Software Updates

When a new software update is available for your device, the notifications panel will display the software update message. Just you need to pull down the notification bar, and then press ‘Software Update’, and this will begin the upgrade process of device Wiko Ufeel Prime to latest UFEEL_PRIME_Nougat_V25, based on Android 7.0 Nougat.

If in-case you have not received the software update, then just follow the below guides, to flash firmware (.pac) manually through either below guide. No matter which method you prefer, however, OTA is safer method to upgrade your device. But in case you prefer upgrading your device manually, then just carefully follow our below guide step by step.

How to Manually update Wiko Ufeel Prime to UFEEL_PRIME_Nougat_V25 Android 7.0 Nougat

Step 1: Below steps are compelled, assuming that you have already downloaded the QPST Tools, and the required drivers along with the Firmware (Stock ROM), as mentioned in the prerequisite section above. If you have down so already, then let’s proceed to the next step.

Step 2: Now extract the QFIL Tool zipped file into a folder, then navigate to the same folder. Now, run the file ‘QFIL’ tool from the extracted folder.

QFIL tool

Step 4: Then, simply click on the ‘Browse’ button, which is located under the ‘Select Programmer’ and right next to the ‘Programmer Path’, and then select the .mbn file from the folder where you have extracted the same.

Step 5: Once the ‘MBN’ file is selected, the Updated ROM or Stock ROM would be automatically selected.

Step 6: Now, it’s time to Load XML. For doing the same select the file rawprogram_unsparse_without_qcn.xml, followed by choosing the Patch0.xml.

You might have noticed at this stage that the ‘Load XML’ has the two options listed, which are described as follows:

Option A: rawprogram_unsparse_without_qcn.xml: When selecting this file, data would be retained and won’t be lost.

Option B: rawprogram_unsparse.xml : Selecting this option will lose the ‘RF Calibration data’, ‘IMEI’ and ‘WiFi/Bluetooth’ address.

Step 7: Now, just turn off the device. Then, connect the device to computer, while pressing and holding the ‘Volume UP’ and ‘Volume Down’ keys simultaneously.

Step 8: Then, just click on the option ‘Select Port’ and then select the port. Now, simply click on ‘Download’, and that will begin flashing the firmware on your device.

Step 9: Now, it’s time to disconnect the device from computer, unplug the USB cable when ‘Finish Download’ dialog box appears on the screen.

Caution: Never unplug/ disconnect the USB Cable while status is ‘Waiting’ or ‘Reset Phone’ is in progress.

Congratulations, you have successfully flashed UFEEL_PRIME_Nougat_V25 Android 7.0 Nougat on your Wiko Ufeel Prime device. If you faced any issue while flashing, then do not hesitate to let’s know in the comments section below.

Related Articles